Adjusting The Pictures On The Lcd Screen; Loading The Disc Or Sd Card; Playback - Panasonic DMP-B15 Operating Instructions Manual

Adjusting the pictures on
the LCD screen
1
Press [LCD].
≥It is also possible to display with the following procedures.
1Press [OPTION].
2Select "To Others" with [3, 4], and select [OK].
3Select "LCD Menu" with [3, 4], and select [OK].
LCD Menu
Picture
Dynamic
Brightness
Colour
Monitor On
OPTION RETURN
2
Select the item with [3, 4].
3
Change the setting with [3, 4, 2, 1].
≥Underlined items are the factory presets.
∫When selecting other settings than "AUX"
with [AV SELECT]
Picture:Adjusting image quality
Standard
≥Standard:
Picture with high contrast
≥Dynamic:
≥Night: Picture suitable for viewing in dark places
≥User: j Brightness : j5 to +5
j Colour : j5 to +5
Monitor:Displaying images
≥On: Image display
No image
≥Off:
∫When selecting "AUX" with [AV SELECT]
( 25)
PICTURE:Adjusting image quality
Standard
≥STANDARD:
≥DYNAMIC: Picture with high contrast
Picture suitable for viewing in dark places
≥NIGHT:
j BRIGHTNESS :j5 to +5
≥USER:
j COLOUR :j5 to +5
MONITOR:Displaying images
When you want to view 4:3 images
≥NORMAL:
When you want to view 16:9 images
≥FULL:
No image
≥OFF:
≥If you are not using the LCD on this unit, select "Off (OFF)" to
conserve power. (The [Í] indicator flashes.)
≥If the settings in "PICTURE" are changed when "AUX" is
selected, the settings in "Picture" will also change.
The settings will change in the same way even when
something other than "AUX" is selected.
To exit the screen
Press [LCD] or [RETURN].
To display images when the "Monitor (MONITOR)"
is set to "Off (OFF)"
Press [LCD] or [OPTION].
Loading the disc or SD
card
Disc
OPEN
1
Open the screen and press [OPEN].
2
Set the disc holding the unit with your hand
and close the lid.
3
Close the screen.
≥Some discs may start playing when it is loaded with the unit
turned on.
≥About discs with a cartridge
j BD-RE with a cartridge: It cannot be used with this unit. (It
cannot be used even if the disc is taken out from the
cartridge.)
j DVD-RAM, 8 cm disc:Remove the disc from the cartridge
and set the disc in the tray.
j Place the disc back into the cartridge for storage to prevent
dirt and scratches after use.
≥Do not touch the lens as it may
make it dirty.
SD card
1
Open the cover at the side of the unit.
2
Insert the SD card into the SD card slot.
≥Press on the centre of the card until it clicks into place.
3
Close the cover.
To remove the card
In step 2 above, press the centre of the card until it "clicks", and
pull the card out straight.
Clicks
into place.
Label side up
(Double-sided disc:
place the label side
up that you want to
play back)
Lens ( below)
Lens
Insert the card
with the corner
cut-side up.
Label side
13
RQT9338