Panasonic Viera TX-P42ST30B Operating Instructions Manual page 98

Message
Reset to Factory Shipping
Condition Completed.
Please switch off TV.
Sending Preset Data
Software successfully updated.
Press EXIT to continue.
Software update failed.
Please try again later.
Press EXIT to continue.
The device is not directly
connected to the TV.
The device may not work
correctly.
This timer will not follow
the TV Guide information.
Press OK to continue,
RETURN to restore original
timer.
Timer already expired !
Timer incorrect !
Timer overlap.
Press OK to keep,
RETURN to edit.
Tuner Locked
Press EXIT to unlock and
stop recording
Unable to download,
please check equipment
3D image not available.
■
Media Player
Message
Cannot read file
No Device Inserted
No valid file to play
This operation is not possible
■
Network
Message
The software update is not
completed.
Ethernet cable not
connected
98 98
•
[Auto Setup] will automatically start when Mains power On / Off
switch is next turned On. (p. 13)
•
Q-Link or VIERA Link channel download is in progress.
•
The software updating is finished.
•
Perform [System Update Search Now] in System Update (p. 58).
If this is still unsuccessful, there may not be any new software
available.
•
Please do not connect the device via a USB HUB.
•
If you edit the start time or end time of Guide link programming by
more than 10 minutes, it will no longer be performed as Guide link
programming. The programming will be performed according to the
time setting.
•
The starting time in Timer Programming has already passed. Set
the timer correctly (p. 52).
•
Set the start and end times in Timer Programming correctly (p. 52).
•
Timer programming events are overlapped. Press the OK button
to keep the overlapped setting. [Ext Rec.] are given priority over
[Reminder]. When two or more [Ext Rec.] overlap, the first timer
programming event starts and finishes as programmed. The next
timer programming event can then start.
•
If you want to unlock the tuner, cancel Direct TV Recording
(p. 78, 80) or the recording of Timer Programming (p. 52).
•
The tape or disc is active. Stop the equipment and try again.
•
You may use a function not available for 3D effect. Exit the function
to view the 3D images.
•
The file is broken or unreadable.
Check applicable data format. (p. 88, 89)
•
Confirm the SD Card or USB device is inserted correctly.
•
The card has no data.
•
The selected operation is not available.
•
Network download failed.
Check the connections and settings. (p. 69 - 74)
•
Check the connection of the LAN cable. If you use a hub, also check
the light on the hub is lit.
•
The LAN cable might be defective.
Meaning / Action
Meaning / Action
Meaning / Action