Panasonic Viera TX-P42UX30E Operating Instructions Manual page 7

Attaching / removing the pedestal
Warning
Do not disassemble or modify the pedestal.
•
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any pedestal other than that provided with this TV.
•
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
•
If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest Panasonic dealer
immediately.
During set-up, make sure that all screws are securely tightened.
•
If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal will not be strong enough
to support the TV, and it might fall over and become damaged, and personal injury may result.
Ensure that the TV does not fall over.
•
If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal injury may
result.
Two or more people are required to install and remove the TV.
•
If two or more people are not present, the TV may be dropped, and personal injury may result.
When removing the pedestal from the TV, do not remove the pedestal by the methods other than the specified
procedure. (see below)
•
Otherwise the TV and / or pedestal may fall over and become damaged, and personal injury may result.
A Assembly screw (4)
(silver)
M5 × 20
1 Assembling the pedestal
Use the assembly screws
pole to the base securely.
C D
•
Make sure that the screws are securely
tightened.
•
Forcing the assembly screws the wrong
way will strip the threads.
A
D
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Remove the assembly screws
2 Pull out the pedestal from the TV.
3 Remove the assembly screws
B Assembly screw (4)
(black)
M5 × 25
2
to fasten the
A
C
Front
from the TV.
B
from the pole.
A
C Pole
•
TBL5ZA3028
Securing the TV
Use the assembly screws
B
•
Tighten the four assembly screws loosely at first, then tighten
them firmly to fix securely.
•
Carry out the work on a horizontal and level surface.
B
Hole for pedestal
installation
D
(View from the bottom)
D Base
•
TBL5ZX0030
to fasten securely.
Arrow mark
7