Panasonic Viera TX-L32E31B Operating Instructions Manual page 7

Attaching / removing the pedestal
To help avoid risk of damage or injury by the TV tipping or falling, please follow the warnings and cautions below:
Warning
•
Do not disassemble or modify the pedestal.
Caution
•
Do not use any pedestal other than the one provided with this TV.
•
Do not use the pedestal if it becomes warped or physically damaged. If this occurs, contact your nearest Panasonic dealer
immediately.
•
During setup, make sure that all screws are securely tightened.
•
Ensure that the TV does not suffer any impact during installation of the pedestal.
•
Ensure that children do not climb onto the pedestal.
•
Install or remove the TV from the pedestal with at least two people.
A Assembly screw (4)
•
XSS5+15FNK
M5 × 15
B Assembly screw (4)
•
XYN4+F30FJK
M4 × 30
1 Assembling the pedestal
Use the assembly screws
to the base securely.
C D
•
Make sure that the screws are securely
tightened.
•
Forcing the assembly screws the wrong way
will strip the threads.
A
C
D
Installing / removing remote's batteries
1
Hook
2
Note the correct
polarity (+ or -)
C Bracket
•
TBL5ZA3017
(TX-L32E31B)
•
TBL5ZA3014
(TX-L42E31B)
to fasten the bracket
A
Hold the bracket not to
fall over
Front
Caution
•
Pull open Incorrect installation may cause battery leakage and corrosion, resulting
in damage to the remote control.
•
Do not mix old and new batteries.
•
Replace only with same or equivalent type. Do not mix different battery
types (such as alkaline and manganese batteries).
•
Do not use rechargeable (Ni-Cd) batteries.
Close
•
Do not burn or break up batteries.
Batteries must not be exposed to excessive heat such as sunshine, fire, etc.
•
Make sure you dispose of batteries correctly.
•
Ensure batteries are replaced correctly, there is danger of explosion and
fire if battery is reversed.
•
Do not disassemble or modify the remote control.
2 Securing the TV
Use the assembly screws
•
Tighten the four assembly screws loosely at first, then tighten
them firmly to fix securely.
•
Carry out the work on a horizontal and level surface.
B
Foam mat or thick soft cloth
D Base
•
TBL5ZX0041 (TX-L32E31B)
•
TBL5ZX0147 (TX-L42E31B)
to fasten securely.
B
B
7