MSI MS-7504 User Manual page 36

MS-7504 Mainboard
Halt On
The setting determines whether the system will stop if an error is detected at boot.
When the system stops for the errors preset, it will halt on for 15 seconds and then
automatically resume its operation. Available options are:
[All Errors]
[No Errors]
[All, But Keyboard] The system doesn't stop for a keyboard error.
[All, But Diskette]
[All, But Disk/Key] The system doesn't stop for either a disk or a keyboard
System Information
Press <Enter> to enter the sub-menu, and the following screen appears.
This sub-menu shows the CPU information, BIOS version and memory status
of your system. Read-only.
3-8
The system stops when any error is detected.
The system doesn't stop for any detected error.
The system doesn't stop for a disk error.
error.