Magnavox MDV412SL Owner's Manual page 12

12 Hookups (cont'd)
RIGHT AUDIO IN
LEFT AUDIO IN
S-VIDEO IN
1
3
1
Connect an S-Video cable (not supplied) to the S-VIDEO
(VIDEO OUT) jack of the DVD Player and to the TV's
S-VIDEO In jack.
2
Connect the supplied audio cable to the red and white
AUDIO OUT jacks on the DVD Player and to the left/right
AUDIO IN jacks on the TV. Match the cable colors to the jack
colors.
3
Plug the power cords of the DVD Player and the TV into an
active power outlet. Press STANDBY-ON y y on the front of
the DVD Player to turn it on.
4
Turn on the TV. Set it to the correct S-Video In channel. See
your TV owner's manual for details. Or, go to your lowest TV
channel (01 or 02) and change channels downward until you see the
blue DVD screen saver on the TV.
Connecting to a TV Only
TV has an S-Video In Jack
2
Back of TV
(example only)
RIGHT AUDIO IN
LEFT AUDIO IN
S-VIDEO IN
Helpful Hints
• On the TV, the S-Video In jack
may be labeled Y/C, S-Video, or
S-VHS (super video).
• If your TV has a single Audio In
jack instead of separate
left/right Audio In jacks, you will
need a different audio cable.
You need a "splitter" audio
cable to go from the AUDIO
OUT jacks of the DVD Player to
the single Audio In jack on your
TV. See your electronics retailer
for details.