Activate/Deactivate The Silent Mode; Activate/Deactivate The Vibrator; Reading Your Gsm Phone Number - Philips Xenium User Manual

Activate/deactivate the silent mode

If you do not want your phone to ring when you receive a call, activate the silent ringer.
If you receive a call while the silent mode is activated, the
LED flashes quickly, and the display shows
In idle screen:
• Press the Pilot Key
volume , then, with the Pilot Key, adjust
Press the Pilot Key
• The ringer is deactivated. To reactivate the ringer, repeat the above sequence and select
the required volume.
L
NOTE
Silent mode can be assigned to a hotkey (see page 44).

Activate/deactivate the vibrator

If you have the Vibra battery and if you have set the function, your phone vibrates when you
receive an incoming call.
In idle screen:
• Press the Pilot Key
• Move the Pilot Key up
to confirm.
Using the Vibra battery doesn't mute the ringer. If you want to mute it and keep only the
vibrator function active, set the quick setting
L
NOTES:
1. The Vibrator option is only available if a vibrating battery is installed (see batteries page 62).
2. The Vibrator Setting is independent from the ringer. You can activate both at the same time.

Reading your GSM phone number

In idle screen:
• Press the Pilot Key
Names
• In the
press the Pilot Key
• Your phone number is displayed if it is present on your SIM card. If not, select
follow the instructions on the screen.
L
NOTE:
If your own number has been stored in the Names list, you can read it during a call. See "Consulting the
Names list". page 19.
20
, select the
to confirm.
, select
or down
.
menu, move the Pilot Key until you reach
.
Using your phone
Incoming call
Settings
menu,
Ringer volume
Settings Sounds
,
On
to select
Silence .
symbol flashes, the green
, but the phone does not ring.
Sounds
,
to silent.
Vibrator
then
Off
or and press the Pilot Key
Own num.
Ringer
.
then
New
then