Voice Dial; Flash Dial; During A Call - Philips Xenium User Manual

Voice dial

You can automatically dial a number by saying your correspondent's name.
In idle screen:
• To program a voice tag :
Press the pilot Key
Names
menu, choose the Name you want to add a Voice dial to. Press the
Pilot Key
Follow the instructions displayed on the screen which invite you to say, then to repeat
the voice tag.
• To dial a number associated with a voice tag:
Press and hold the Pilot key, then say the voice tag of the number to dial.
If the phone recognises the voice tag, it repeats it then immediately dials the number
associated with it.
L
NOTES:
1. The duration of a voice tag is 2 seconds.
2. Up to 15 voice tags can be defined and shared between voice dial and voice command.

Flash dial

You can associate any of the keys
access, through a single long key press, to a frequently used phone number (see page 25). Keys
and are defined and cannot be changed. (See page 42).
In idle screen:
• Press and hold a key between
The connection is established.
• After the call press

During a call...

You can:
• Adjust the earpiece volume (see page 18)
• Mute or unmute the microphone (see page 18)
• Write a number in the notepad (see page 18)
• Consult the Names list (see page 19)
• Add a name to the Names list (see page 25)
• Write and send a message via the Names list or the Notepad (see page 25)
• Read a message (see page 28)
• Check a voice mailbox or access a voice server via the Notepad (see page 30)
to access the main Menu and select Names. In the
twice then select
to hang up.
Using your phone
Voice dial then
to with a Names list entry to give you direct
and to dial the associated entry.
Add Voice tag? .
17