Inserting The Batteries In The Remote Control; Operating Range Of The Remote Control - Philips BDL5531EL User Manual

User Manual BDL5531EL
2.4.2.

INSERTING THE BATTERIES IN THE REMOTE CONTROL

1. Remove the cover on the rear of the remote control.
2. Insert two AAA size 1.5V batteries ensuring that the "+" and "-" ends of the
batteries are correctly aligned.
3. Replace the cover.
Note: Do not mix battery types, e.g. alkaline and manganese.
2.4.3.

OPERATING RANGE OF THE REMOTE CONTROL

When pressing a remote control button, point the top of the remote control towards
the remote control sensor.
Use the remote control within a distance of about 10m/32ft from the display's remote
control sensor and within a horizontal and vertical angle of 45 degrees.
Note: The remote control may not function properly if the remote control sensor on the display
is under direct sunlight, in a location with strong illumination, or if there is an obstacle in the
path of signal transmission.
RETURN TO THE CONTENTS