User Manual BDL5531EL
1.4.
PORTRAIT MOUNTING
Wall mounting holes
Notes:
• M6 (10mm) screws (with a length 10-15mm longer than
the thickness of the mounting bracket) are needed for wall
mounting (not included). Tighten the screws securely
(recommended torque: 470 - 635N cm)
• The mounting interface should comply with the UL1678
standard in North America. The mounting means should be
strong enough to bear the weight of the display (approx. 29
kg (63.9 lb) without stands).
Allowable tilting angle in Portrait Mode
Note: The remote control sensor should be on the right side
when rotating your display.
Note: When installing the display on the wall, please consult a professional technician
for proper installation. The manufacturer accepts no liability for installations not
performed by a professional technician.
RETURN TO THE CONTENTS