Clock/Timer; Clock Setting; Display Clock - Philips MC-57 User Manual

STANDBY - ON
ECO
POWER
iR
OPEN
IMPORTANT!
When in Eco Power Standby mode, it is not
possible to operate the clock or timer
function.

Clock Setting

The clock can be set in either 12-hour or
24-hour mode ("AM 12:00" or "00:00" for
example)
1
Press and hold CLOCK on the remote control
until the time flashing on the display.
2
Press PROG repeatedly to select clock mode.
If 12-hour mode is selected, "AM XX:XX"
will start flashing.
If 24-hour mode is selected, "XX:XX" will
start flashing.
3
Press à or á repeatedly to set the hour.
4
Press í or ë repeatedly to set the minute.
5
Press CLOCK again to store the setting.
The clock will start working.
To exit without storing the setting
Press Çon the system.
M I C R O S Y S T E M
PAUSE
NEWS
Notes:
– The clock setting will be cancelled when the
power cord is disconnected or if a power failure
occurs.
– During clock setting, if no key is pressed within
90 seconds, the system will exit clock setting mode
automatically.
– To set the clock automatically through the time
information in the RDS signal, refer to "Radio
Reception - RDS Time".

Display Clock

The system allows you to select clock display or
normal display in any source mode (except Eco
Power Standby mode). When in Standby mode,
the clock will automatically be displayed.
Press CLOCK on the remote control
repeatedly to select clock display or normal
display mode.
displayed. If the clock has not been set, "--:--"
will appear on the display.
Note:
– If you pressed any keys during clock display
mode, the display will briefly show the information
related to the selected mode.

Clock/Timer

CD 1•2•3
PLAY STOP
DEMO STOP
TUNER
PREV NEXT
PRESET
TAPE
SEARCH/ TUNE
AUX/CDR
PROG REC
VOL
BASS TREBLE
DIGITAL
SOUND
CONTROL
When in clock display mode, clock will be
- - + - - +
25