Basic Functions; Plug And Play - Philips MC-57 User Manual

Basic Functions

STANDBY - ON
ECO
POWER
iR
OPEN
IMPORTANT!
Before operating the system, complete the
preparation procedures.

Plug and Play

Plug and Play allows you to store all available
RDS stations and radio stations automatically.
If Plug and Play has not been installed
1
When you turn on the system, "AUTO
INSTALL - PRESS PLAY" will be
displayed.
2
Press PLAYÉ(É Å ) on the system to start
installation.
"INSTALL" will be displayed and followed
by "TUNER" and then "AUTO".
will start flashing.
PROGRAM
The system will search for all RDS stations
and then continue with radio stations on FM,
MW and LW band respectively. Weak RDS
stations may be stored in later presets.
All available RDS and radio stations with
sufficient signal strength will be stored
automatically.
The system will stop searching when all the
available radio stations are stored or when the
memory for 40 preset radio stations is used.
The last preset radio station or the first
available RDS station will play when Plug and
Play is completed.
12
M I C R O S Y S T E M
PAUSE
NEWS
3
The system will proceed to set the RDS time
automatically with the stored RDS preset station.
If no RDS station is found in the first preset
station;
If RDS radio station is found;
by "TIME".
When searching RDS time;
be displayed. The current time will be displayed
for 2 seconds and stored automatically.
within 90 seconds, the programme will exit
automatically and the display will show "NO
RDS TIME".
To reinstall Plug and Play
1
In Standby or Demonstration mode, press and
hold PLAYÉ(É Å ) on the system until
"AUTO INSTALL - PRESS PLAY" is
displayed.
2
Press PLAYÉ(É Å ) again to start installation.
replaced.
To exit without storing the Plug and Play
Press Çon the system.
CD 1•2•3
PLAY STOP
DEMO STOP
TUNER
PREV NEXT
PRESET
TAPE
SEARCH/ TUNE
PROG REC AUX/CDR
VOL
BASS TREBLE
DIGITAL
SOUND
CONTROL
The programme will exit automatically.
"INSTALL" will be displayed and followed
"SEARCH RDS TIME" will be displayed.
When RDS time is read, "RDS TIME" will
If RDS station does not transmit RDS time
All previously stored radio stations will be
- - + - - +