Network Setup; Easylink Setup - Philips MBD7020 User Manual

Network setup

1
Press .
2
Select [Setup], and press OK.
3
Select [Network Setup], and press .
Network Installation
Video Setup
View Network Settings
Audio Setup
View Wireless Settings
Network Setup

EasyLink Setup

Preference
Advanced
4
Select an option, then press OK.
5
Select a setting, then press OK.
• To return to the previous menu,
press BACK.
• To exit the menu, press
[Network Installation]
Install the network connection.
[View Network Settings]
Display the information for the current
network status.
[View Wireless Settings]
Display the information for the current Wi-Fi
status.
If the current network is not set to a wireless
connection, this feature is de-activated.
EasyLink setup
1
Press
2
Select [Setup], and press OK.
3
Select [EasyLink Setup], and press .
Video Setup
Audio Setup
Network Setup
EasyLink Setup
Preference
Advanced
4
Select an option, and press OK.
5
Select a setting, and press OK.
•
. •
[EasyLink]
This product supports Philips EasyLink which uses
the HDMI CEC (Consumer Electronics Control)
protocol. You can use one single remote control
to control all EasyLink-compliant devices that are
connected through HDMI connectors.
• [On] - Turn on EasyLink features.
• [Off] - Disable EasyLink features.
[One Touch Play]
When you press
this product, the TV (if the TV supports
one-touch play) automatically turns on and
switches to the video-in channel. Disc play
starts if there is a disc in this product.
• [On] - Turn on one-touch play feature.
• [Off] - Disable one-touch play feature.
[One Touch Standby]
When you press and hold
the connected HDMI CEC devices (if the
device supports one-touch standby) switch to
standby mode simultaneously.
• [On] - Turn on one-touch standby feature.
• [Off] - Disable one-touch standby feature.
.
EasyLink
One Touch Play
One Touch Standby
System Audio Control
Audio Input Mapping
To return to the previous menu,
press BACK.
To exit the menu, press
(standby) to turn on
(standby), all
On
On
On
Off
.
EN 29