Tip
•
According to the location and time zone you
select, the unit can have the clock time set
and adjusted automatically through the online
service over the Internet.
•
To check and change current location and time
zone, go to [Settings] > [Location and time
zone].
Manual setting
1
Turn on the unit, if necessary.
2
From Home screen, select [Settings] >
[Clock settings] >[Date and time].
3
In [Date and time], select [Current date
and time] > [Manual].
4
To enter date and time,
•
Press
or
location;
•
Enter the desired digits by pressing
the numeric buttons;
•
Tap on
OK to confirm.
•
You can also press
repeatedly, or press and hold or
until the desired digit appears.
to select the entry
or
Set date/time format
Select how date and time are displayed in the
clock.
1
Follow Step 1-2 under "Manual setting".
2
In [Date and time], go to [Time format]
or [Date format] to select options.
Network settings
Setup network
After the first-time setup, you can change how
MCi298 connectsto home network:
•
Switch between different connection
methods (wireless or wired,
automatic or manual);
•
Switch between different routers.
To do so, do the following:
1
From Home screen, go to [Settings] >
[Network settings] > [Setup network].
2
Connect MCi298 as you did in the
first-time setup (see 'Connect to home
network' on page 18).
Location and time zone
After the first-time setup, you can change the
selected location and time zone when moving
to a new location or time zone.
According to the selected location and time
zone, MCi298 can
•
Set clock automatically over the
Internet (see 'Date and time' on page
36);
•
Pre-load preset Internet radio
stations automatically.
EN
37