Philips HP4887 Owner's Manual page 11

troubleshooting
If problems should arise with your hairdryer and you are unable to solve
them by means of the troubleshooting guide below, please contact the
nearest Philips service centre or the Philips Customer Care Centre in
your country.
Problem
The appliance
does not work
at all.
Solution
Perhaps the socket to which the appliance has been
connected is not live.
Make sure the socket is live.
The appliance may have overheated and switched
itself off.
Unplug the appliance and let it cool down for a few
minutes. Before you switch the appliance on again,
check the grilles to make sure they are not blocked
by fluff, hair, etc.
The appliance may not be suitable for the voltage
to which it has been connected.
Make sure that the voltage indicated on the
appliance corresponds to the local mains voltage.
The mains cord of the appliance may be damaged.
If the mains cord is damaged, it must be replaced by
Philips, a service centre authorised by Philips or
similarly qualified persons in order to avoid a
hazard.
EnglisH
11