Network Test - Samsung LA32C550J1M User Manual

Ad-hoc: You can connect to a mobile device without
an access point through the "Samsung Wireless LAN
Adapter" by using a peer to peer network.
How to connect to new Ad-hoc
1. Choose Select a network.
2. While in the device list, press the Blue button on
the remote or select Ad-hoc.
✎
The message The existing network system
may have limited functionality. Do you
want to change the network connection? is
displayed.
3. Input the generated Network Name (SSID)
and Security Key into the device you want to
connect.
How to connect an existing Ad-hoc device
1. Choose Select a network. Then, the device list
will be displayed.
2. Select the device you want in the Device list.
3. If security key was applied, input the security key
again.
✎
If network doesn't operate normally, check
the Network Name (SSID) and Security Key
again. An incorrect Security Key may cause a
malfunction.
Wireless Network Setup (Auto / Manual)
If you connect the AP which supports DHCP, you can
set Internet Protocol Setup to Auto.
If The AP supports a static IP address, you must set
Internet Protocol Setup to Manual.
1. Set Network Type to Wireless.
2. Select Network Setup.
x
Selects an AP(Access Point) and ad hoc
network.
x
Set Internet Protocol Setup and DNS Server
to Auto or Manual. If you set to Manual,
you can set up IP Address, Subnet Mask,
Gateway and DNS Server manually by
pressing number buttons on the remote control.
3. Select Network Test to check the network
connectivity.

Network Test

Test or confirm the network connection status after setting
up the network.
✎
When unable to connect to a wired network
x
If your internet service provider has already
registered the MAC address of the PC you're using
to connect to the internet and authenticates the
address each time you connect to the internet, your
TV may not connect to the internet because the MAC
address differs from that of the PC. In this case, ask
your Internet service provider about the procedures
to connect devices other than your PC (such as
your TV) to the Internet.
x
If your Internet service provider requires an ID or
password to connect to the Internet (network), your
TV may not be able to connect to the Internet. In this
case, you have to enter your ID or password when
connecting to the Internet using an Internet sharer
(router).
x
The internet connection may fail due to a firewall
problem. In this case, contact your Internet service
provider. If you cannot connect to the Internet
even if you have followed the procedures of your
Internet service provider, please contact Samsung
Electronics.
✎
When unable to connect to an AP (Access Point)
x
Your TV may fail to locate an AP (Access Point) that
is configured as a private SSID type. In this case,
please change the AP settings and try again. If your
internet service provider has already registered the
MAC address of the PC you're using to connect to
the internet and authenticates the address each time
you connect to the internet, your TV may not connect
to the internet because the MAC address differs
from that of the PC. In this case, ask your Internet
service provider about the procedures to connect
devices other than your PC (such as your TV) to
the Internet. If you cannot connect to the Internet
even if you have followed the procedures of your
Internet service provider, please contact Samsung
Electronics.
25
English