Saving A Radio Station; Changing The Radio Settings; Adjusting The Audio Effects; Using The Virtual Super Bass Effect - Parrot RK8200 User Manual

Adjusting the
audio effects

Saving a radio station

1. Press the key and select
2. Select a place and press the jog wheel to confirm.
You also can press the
from the numerical pad of the Parrot RK8200 to save a radio
station.

Changing the radio settings

The Parrot RK8200 allows you to change the following settings.
- Auto store: seek automatically and store the 12 radio
stations with the highest RF level in the current band.
- RDS scan: activate / deactivate the RDS scan which allows
to change automatically the frequency of the current radio
station when the signal becomes too weak.
- Traffic alert: activate / deactivate the traffic alert which
allows to activate the Radio source when the current station
starts broadcasting traffic information.
- FM step: select the FM step (50 or 100 kHz.)
- Activate AM: activate / deactivate the AM frequencies.
To change the settings :
1. Enter the main menu and select
2. Change the settings using the jog wheel.
The Parrot RK8200 allows you to change some audio settings. To do
so, press the

Using the Virtual Super Bass effect

The VS Bass effect allows you to amplify the low frequencies.
To activate it, press the
option.
You can change the settings of this effect by selecting
effect > Settings> Vsb
Parrot RK8200 - User Guide
Store
key then hold down a number
Radio
key or select the Audio effects
key and select the
preferences.
New.
> Settings.
option.
virtual super bass
Audio
22