Panasonic TX-P42VT30Y Operating Instructions Manual page 74

■
To start One Touch Recording
Set the position to "TV"
•
No other channel can be selected while the
recording is in progress.
■
To stop recording on the way
■
To play back or delete the recorded contents
•
Even if One Touch Recording is in progress, you can play back all the contents. (Depending on the USB HDD / SD Card, it may
not be available or the recording may not work properly while playback.)
Record constantly [REW LIVE TV]
(USB HDD only)
Recording the current programme constantly.
Select [Auto] to start REW LIVE TV
Recording Setup
USB HDD Setup
One Touch Recording
REW LIVE TV
Default REC Mode
SD Card Formatting
SD Card Information
■
To operate the REW LIVE TV
Set the position to "TV"
•
After pausing or searching backward, the following buttons are available to operate.
search backward
playback / pause
search forward
stop (stops the current operation and
goes back to live TV)
■
To stop the REW LIVE TV
Recording Setup
USB HDD Setup
One Touch Recording
REW LIVE TV
Default REC Mode
SD Card Formatting
SD Card Information
•
REW LIVE TV will be stopped and the recorded content deleted automatically in the following conditions :
(Even if REW LIVE TV stops for the following conditions, as long as the setting is [Auto], the new recording will start
automatically in a condition that makes the recording available.)
• selected other channels
• selected locked channel
• selected invalid channel
74
Start
or
180 minutes
Auto
•
When you select [Auto], the recording will start automatically.
DR
•
If the other recording is in progress, TV signal condition is bad or when any images
are not displayed, this recording will not start.
•
To pause
Off
•
If you stop the REW LIVE TV, the recorded content for the REW LIVE TV will be
Auto
deleted.
■
When both USB HDD and SD Card are available
Select the recording device
Please select recording device
EXIT
OK
Select
RETURN
SD Card
"Recorded TV mode" (p. 84)
select
access / store
•
To search backward (up to 90 minutes)
(Press and hold)
search backward / pause /
forward playback
(Press and hold)
select [Off ]
• no TV signal
• when the other recording starts
• when the TV is turned off or standby
select
set
USB HDD1
playback
stops the current
operation and
goes back to
stop
live TV