Table of Contents
Advertisement
Preparing the phone to send MMS messages
The Multimedia Message service is subscription and network dependent. The operator profile
details may already be stored on your phone. If not, please contact your service provider to get
them.
The profile list can contain up to 3 MMS profiles. A profile is a list of parameters that allow MMS
connections via a specific gateway.
To enter and store the profile details
You can only register profile details if you have previously registered profiles in the Connection
manager menu (see "Connection manager", page 101):
1
Press the [Menu/T9] key. Select
2
Select
Multimedia
3
Select Settings.
4
Select
MMS
profiles.
5
Choose an empty profile ([...]) and press OK.
6
Enter the profile name and press OK.
7
Select
Message
the http:// and https:// root address, or type in the URL address. Press OK.
8
Select
Connection
GPRS connection fields are linked to the Connection manager and thus allow to pick one
from the displayed list - see "Connection manager", page 101). Select
data.
9
Select
Gateway settings
The sending and receiving of MMS is now possible.
10
Select
Advanced settings
1. All the requested parameters are obtainable from your network operator and/or Wap™ provider.
2. The phone number or access point name, the login and the password are to be stored in the Connection
Manager (see Table , page 101).
3. Access to the content of the MMS profile may depend on the pre-programmation of the settings. The con-
nection settings menu may not be available in some cases. These settings may be 'Locked' (operator depen-
dent) and not be user programmable.
4. Your service provider may require to have the security context reset. Select Yes.
5. For more information on the Advanced settings please refer to "Advanced settings on Wap™ profiles", page 94.
6. The Validity period for an MMS is the maximum time the message is available on the network before it can
be retrieved by the addressee. The validity period is set to Maximum by default. This fearture is present in the
Advanced settings (page 94).
7. When on an existing profile the options Select, View, Delete and Reset security context are available.
Setting multimedia messages characteristics
Before sending a message you can determine whether or not you want to receive a delivery report,
a read reply report (to confirm your message and its contents were read by the addressee), to set
a priority degree (high, normal or low) and a maximum picture size to your message.
1
Press the [Menu/T9] key. Select Messages.
2
Select MMS.
3
Select Settings.
4
Select
Message config.
5
Enter the required information and select
The availability of this menu and of its contents is operator dependent.
Signature
The MMS application has it own signature independent from the SMS or e-mail ones (please see
"Signature", page 29).
1
Press the [Menu/T9] key. Select Messages.
2
Select MMS.
3
Select Settings.
4
Select
Signature
5
Select
Insert in message
6
Select
Text
or
or select the phonecard to be add to the MMS, it can be either My card or any other phone-
card.
Messages
messages.
centre. Select
List
to select one of the available home page addresses or
profiles. Enter the requested information (the GSM connection and
and type in the IP address.
and fill in the required fields.
and select Text or Name card.
Name Card
according to your previous choice and enter your signature text
.
Save
to store your settings.
35-
Multimedia Messages
Save
to store the
Advertisement
Table of Contents
