Mitsubishi Electric M900 User Manual page 13

Rejecting a call
When receiving a phone call:
1 Press the [On/Off] key or close the clamshell to reject the call (the call is then forwarded to
your mailbox).
Closing the clamshell only reject the call if the Active-flip feature is activated (please see page 98).
or:
1
Press the [Camera/Video]
Ending a call
1 Press the [On/Off] key.
You can also end a call by closing the clamshell. Please see "active flip", page 98.
To stop the ringtone when receiving a phone call
1
Press No ring
closed.
Holding your mobile (while making or receiving a call)
How to hold
the phone.
When using the hands free mode, do not put the phone to your ear.
The standby display (Main screen)
When switched On, the phone searches for connection with the network. Once the
connection has been established, a beep sounds and the network and/or service
provider name or logo are displayed together with the time and date, the signal
strength and the battery charge level. If the phone cannot find a valid network, the
signal strength and the operator name are not displayed.
On the main screen, the four arrows indicate that features can be accessed via
the four arrows on the cursor key.
The camera symbol in the middle of the cursor key indicates that the Camera
application (short press) and the Video application (long press) can be accessed by pressing
the [OK] key (in the middle of the cursor key).
Message and Wap indicate that you can directly access the Messages and Wap feature by
pressing the softkeys.
The standby display (External screen)
The provider name as well as the time, the signal strength and the battery charge
levels are also displayed on the external screen when the phone is activated.
On both screens, indicates that your phone is connected to a GPRS network.
side key if the clamshell is closed.
if the clamshell is open or press the [Menu]
Avoid
covering the up-
per back of the
phone to allow
maximum emis-
sion and
reception quality.
Getting started
13-
side key if the clamshell is