Auto Setup Function - Panasonic NV-HS960 Operating Instructions Manual

If you are connecting your VCR to a TV using Method 1,
follow the operations explained below.

Auto Setup Function

The Auto Setup function automatically tunes all available TV
stations and sets the VCR's clock to the current date and
time. If the tuning and time/date settings are not correct,
performing timer recordings is not possible.
01 Switch the TV on.
02 Select the AV input on your TV.
03 Set the VCR/TV switch
04 Press the VCR-ON/OFF button
to switch the VCR on.
The Country setting menu
appears on the TV screen.
05 Press the Cursor buttons
(3421) to select the
country where you are using the
VCR.
06 Press the OK button
VCR's Auto Setup automatically
starts and tunes all available TV
stations and also sets the clock.
This takes about 5 minutes.
07 When the indication shown on
the right appears on the VCR
display, the Auto Setup is
complete.
08 Press the MENU button
more than 5 seconds so that
the RF output channel
number appears on the VCR
display.
The initial setting is channel 36.
09 Press the Numeric button "0"
so that the displayed RF
output channel number
changes to "– –".
10 Press the OK button
To Cancel the Auto Setup Before It Has Finished
√
Press the EXIT button
14
to "VCR".
On Screen Display
Country
België Deutschland
Belgique Österreich
Belgien Portugal
Suomi
Danmark
Sverige
España
Schweiz
France
Italia Suisse
Nederland Svizzera
Norge others
Menu for Country setting
and the
Auto-Setup
Auto-Setup
in progress,
please wait.
Ch 21
Indication during Auto Setup
VCR display
CVC
Programme Indication when the
position current time is 16:45
for
Indication when the RF output
channel is 36 (example)
Indication after changing the RF
output channel to "– –"
to conclude the setting.
.
Hint:
≥ If you select "Schweiz", "Suisse" or "Svizzera" on the
Country setting menu, the Display setting menu appears
automatically to let you set the item "Power save" to "ON".
In this setting, the VCR's power consumption is minimised
when it is off (Standby mode). To turn the VCR on, keep
the VCR-ON/OFF button
It is not possible to turn it on with the remote control.
When the clock setting menu appears after Auto Setup
has finished:
1 Press the Cursor buttons (3421)
time and date.
2 Press the OK button
3 Press the EXIT button
To Confirm that the TV Stations Have Been
Tuned Correctly by the Auto Setup
Function
1 Press the MENU button
display the OSD Main menu
on the TV screen.
2 Press the Cursor buttons
(3421)
"Tuning" and "Manual" in this
order.
3 Press the OK button
display the list of tuned TV
SP
stations and confirm that all
available TV stations have
been set correctly.
4 Press the EXIT button
When the station names and/or channel numbers have
not been set correctly:
See page 46 for details.
When no station has been set, confirm all connections of
the VCR again and restart the Auto Setup.
(See page 51 for details.)
pressed on the VCR main unit.
to set the correct
to conclude the setting.
to exit the On Screen Display.
to
Main menu
Timer record
Tape Library
Display
Tuning
Clock
Functions
Language
Country
to select
Satellite
to
Tuning
Pos Name
1 ARD
2 ZDF
3 N3
4 HR3
5 BR3
6 RB3
7 SFB3
8 SW3
9 WDR3
10 MDR3
List of tuned TV stations
(example)
to exit the On Screen Display.
Manual
Auto-Setup Restart
Download
Shipping condition
Ch Pos Name Ch
1
11 ORB 35
2 12 RTL+ 4
19
13 SAT1 5
26 14
s s s s s s s s
18
15
s s s s s s s s
3
16
s s s s s s s s
36 17
s s s s s s s s
29
18
s s s s s s s s
17 19
s s s s s s s s
32
20
s s s s s s s s