Table of Contents
Advertisement
Menu operation
* Menus are not displayed when no signal is supplied to the projector.
Picture
Computer Image*6
Video Image*8
Sound
Setting
Language
Factory Default
*1 Default setting varies depending on input signals.
*2 Available only when the input signal is PC or Video signal.
*3 Setting value varies depending on the setting of Image.
*4 Only adjustable when Image setting is User.
*5 Adjustable range and default setting vary depending on signal type.
*6 Not available when the input signal is Video.
*7 Only available when the input signal is PC.
*8 Not available when the input signal is PC.
*9 Only available when the input signal is Video.
*10 Only available when input signal is NTSC.
Important:
•
When the menu is turned on and the signal is lost or not input, the system will not search for the signal even if the signal is input
again. In this case, turn off the menu.
•
The setting will be saved even if the menu is closed.
•
The setting will not be saved when the menu is closed in a no signal state.
Brightness*1
Contrast*2
Color Setting
Keystone
Aspect
Image
PC, Movie, Standard, User
White Intensity*3 *4
Gamma*3 *4
Tracking*5 *7
Fine sync*5
H Position*5 *7
V Position*5 *7
Color*1 *2
Sharpness
Tint*9
Set up*10
Volume
Menu Position
Mounting
Logo
Signal Type*6
Lamp Time
Lamp Time Reset
Auto Power On
Auto Power Off
Auto Source
Lamp Mode
OSD Timeout
Yes, No
0 - 100
0 - 100
Red, Green, Blue
-20-+20
4:3, 16:9
0 - 10
0 - 6
-50 - +50
0 - 31
-10 - +10
-10 - +10
0 - 100
0 - 31
0 - 100
0%, 7.5%
0 - 31
On, Off
RGB, YCbCr/YPbPr
Yes, No
Yes, No
Yes, No
Standard, Low
5, 15, 30, 45, 60 Sec
EN-15
Advertisement
Table of Contents
