How to Use Menu Functions
■
Menu list
Menu
VIERA Link Control
Speaker Selection
Menu
Contrast, Brightness,
Colour, Sharpness
Tint
Colour Temperature
CH Colour Set
Colour Management
P-NR
MPEG NR
3D-COMB
Reset to Default
Menu
Bass
Treble
Balance
Headphone Volume
Surround
Volume Correction
HDMI1/3 Input
Reset to Default
20
Item
Controls the connected Panasonic equipment
"Easy control only with VIERA remote control" (p. 31)
"Speaker control" (p. 31)
•
You can also access VIERA Link Menu directly using the VIERA Link button on the
remote control.
•
Basic picture mode (Dynamic / Standard / Cinema / Auto)
Set for each input signal
Adjusts colour, brightness, etc. for each picture mode to suit your taste
•
Adjusts tint of image
For NTSC signal reception only
Chooses the colour balance of the entire image (Cool / Standard / Warm)
Colour density varying between broadcast channels can be adjusted to three levels for
each reception channel
•
Select the channel you want to adjust and set this function
Automatically adjusts colours to vivid ones (Off / On)
•
Not valid on PC signal
Picture Noise Reduction
Automatically reduces unwanted picture noise (Off / Weak / Strong / Auto)
•
Not valid on HDMI or PC signal
Automatically reduces noise for watching DTV, DVD, VCD and SD Card
(Off / Weak / Mid / Strong)
Automatically makes still pictures and slow pictures look more vivid (Off / On)
•
For PAL or NTSC signal reception only
•
Not valid on S-Video, components, PC, HDMI and SD Card
Press the OK button to reset the present Picture Menu to the default settings
Basic sound mode (Music / News / Cinema)
•
Set for each input signal
Adjusts the output level of deep bass
Adjusts the output level of high-pitch, shrill sound
Adjusts volume level of right and left speakers
Adjusts the volume of the headphones
Surround sound settings (Off / Simulated Surround / SRS TruSurround XT)
Simulated Surround: Provides a dynamic enhancer to simulate improved spatial effects
SRS TruSurround XT: SRS TruSurround XT
•
Switching is also possible by the Surround button on the remote control (p. 7)
Adjusts volume of individual channel or input mode
Select to fi t the input signal (Auto / Digital / Analogue) (p. 37)
Auto
Digital
Analogue : HDMI-DVI adapter cable connection
•
HDMI input mode only
•
HDMI2 terminal is for digital signal only
•
No setting for HDMI2 available
Press the OK button to reset the present Sound Menu to the default settings
Adjustments / Confi gurations (alternatives)
two speakers from the source which can output surround encoded signals
: Automatic detection of digital or analogue sound source
: HDMI cable connection
®
creates a high quality surround sound effect using just