Panasonic Lumix DMC-L10K Operating Instructions Manual page 91

∫ Adjusting each film mode to the
desired setting
1 Press 3/4 or use the front dial
on the screen shown in step 1 on
page 90 to select an item.
2 Press 2/1 or use the rear dial to
adjust the item and then press
[FILM MODE].
3 Press 3/4 to select the item and
then press [MENU/SET].
• You can register 2 settings. ([MY FILM1]
and [MY FILM2]
(After registering, the film mode name that
was registered previously is displayed.)
• [STANDARD] is registered in [MY FILM1]
and [STANDARD] (
[MY FILM2] at the time of purchase.
4 Press [MENU/SET] to close the
menu.
• You can also press the shutter button
halfway to close the menu.
or
MENU
/SET
) is registered in
[CONTRAST]
Increases the difference between
[_] the brightness and the darkness
in the picture.
Decreases the difference
[`] between the brightness and the
darkness in the picture.
[SHARPNESS]
[_] The picture is sharply defined.
[`] The picture is softly focused.
[SATURATION]
The colours in the picture
[_]
become vivid.
The colours in the picture
[`]
become natural.
[NOISE RED.]
The noise reduction effect is
[_] enhanced. Picture resolution may
deteriorate slightly.
The noise reduction effect is
[`] reduced. You can obtain pictures
with higher resolution.
• Noise may become visible when you take
pictures in dark places. To avoid picture
noise, we recommend setting
[NOISE RED.] towards [_] or setting the
items except [NOISE RED.] towards [`] to
take pictures.
• If you adjust a film mode, [_] is displayed
beside the film mode name on the LCD
monitor.
• You cannot adjust [SATURATION] in the
black and white settings in film mode.
• Film mode cannot be adjusted in
advanced scene mode and scene mode.
Menu Settings
91
VQT1G39