Taking Pictures Using Auto Bracket - Panasonic Lumix DMC-L10K Operating Instructions Manual

Advanced
Taking Pictures using
Auto Bracket
In this mode, 3 pictures are recorded in the
selected exposure compensation range
each time the shutter button is pressed.
You can select the picture with the desired
exposure among different exposures.
1 Set the drive mode lever to [
B
ISO
A Auto Bracket (When [
B Viewfinder Display
C When taking pictures with Live View
• [ ] is displayed on the Viewfinder. (It
is displayed on the LCD monitor when
taking pictures with Live View.)
2 Focus on the subject and take a
picture.
• If you press and hold the shutter button,
the number of pictures that you set is
taken.
• The auto bracket indication blinks until
the number of pictures that you set (3)
is taken.
• The picture count is reset to [0] if you
change the auto bracket setting,
change the setting on the drive mode
lever or turn the camera off before all
the pictures that you set are taken.
70
VQT1G39
A
C
P F5.6 F5.6 125 125 ISO ISO 100 100
STANDARD STANDARD
19 19
1 1
] is set)
1
/ 3 EV
∫ Changing the settings for [STEP] and
[SEQUENCE] in auto bracket
1 Press [MENU/SET] to display the
menu.
2 Press 3/4/2/1 to select
[AUTO BRACKET] in the [REC]
menu [
3 Press 3/4 to select [STEP] or
[SEQUENCE] and then press 1.
].
4 Press 3/4 to select the setting
and then press [MENU/SET].
• You can also use the front dial or the
rear dial to set.
When [STEP] has been selected in the
screen shown in step
• [STEP]
– [ 1 ]
/ 3 EV
– [ ]
2
/ 3 EV
– [ ]
1EV
– [ ]
1 1
/
3 EV
– [ ]
1 2
/
3 EV
– [ ]
2EV
When [SEQUENCE] has been selected
in the screen shown in step
• [SEQUENCE]
– [0/`/_]
– [`/0/_]
] and then press 1.
3
3
MENU
/SET