Performing The Initial Start Up - Mio C210 User Manual

CAUTION:
Immediately replace the batteries whenever the batteries are low. It is important that the
batteries have power for the device operation even though power can be supplied to
your device through the in-car power cable or USB cable. Failure to do so can result in
damage to your device.
When replacing the batteries, use the batteries of the same type and manufacturer.
Replace the batteries at the same time. Do not mix the use of old and new batteries.
When not using the battery for a long period (more than one month), remove the
batteries to prevent damage from battery corrosion.
In case the battery leaks, clean the liquid and install new batteries.
NOTE:
After replacing the batteries, you need to press the power button for five seconds to turn
on your device. (See the following section for more information.)
Depending on the characteristics of different battery types, the length of operation time
might differ from one to the other.
Check the regulations of your local government for proper battery disposal.

1.2 Performing the Initial Start Up

1. Make sure that power is supplied to your device either by batteries or by the
in-car power cable.
2. For the initial start up, press the power button for five seconds to turn on
your device.
NOTE: For normal operation, briefly press the power button to turn on and off your dvice.
3. The Language Setting screen pops up. You can tap the left/right arrow to
select a language. Then tap
8
to save the changes.