Panasonic Viera TX-26LMD70A Operating Instructions Manual page 50

On screen messages
No stations found
Please insert the aerial
PIN incorrect !
Please check aerial or local
DVB service availability.
Press OK to start Auto Setup
Please check settings and connections on
HDMI devices.
Please wait.
Recording in progress
Shipping condition completed.
TV can now be switched off.
Software successfully updated
Press EXIT to continue
Software Update failed. Please try again later.
Press EXIT to continue
This service is locked!
Press OK to enter PIN
Timer already expired !
Timer Event Due to Start
1: BBC1 has been
Programmed for recording at 20:00
Timer incorrect !
Timer overlap !
Tuner Locked
Please stop recording to operate
Unable to download, Check Equipment
50
Message Meaning / Action
•
No analogue signal can be found in Auto Setup.
•
The PIN number you entered is wrong.
•
Please follow the message.
If it is still failed, consult your local Panasonic dealer.
•
Communication error in VIERA Link function (p. 40).
•
A function is in progress.
•
The recording equipment is recording the programme signal from
its own tuner. You can turn the TV off and leave the equipment
recording in the normal way.
•
"Auto Setup" will automatically start when Mains power On / Off
switch is next turned On. (p. 10)
•
The software updating is finished.
•
Perform "System Update Search Now" in System Update (p. 27).
If it is still failed, there may not be the new software.
•
The selected channel is locked in Child Lock (p. 29).
•
Starting time in Timer Programming is already past. Set correctly
(p. 37).
•
This message will appear 2 minutes before timer programming
event due to start.
•
Set Starting and Ending times in Timer Programming correctly
(p. 37).
•
The timer programme events are overlapped. Cannot record other
channel at the same time. Check the Starting and Ending times in
Timer Programming (p. 37).
•
If you want to unlock, cancel Direct TV Recording (p. 38) or Timer
Programming (p. 36).
•
The tape or disc is active. Stop the equipment and try again.