Faqs - Panasonic Viera TX-26LMD70A Operating Instructions Manual

FAQs

Before requesting service or assistance, please follow these simple guides to resolve the problem.
If problem still persists, please contact your local Panasonic dealer or Panasonic Customer Care Centre
for assistance. For details (p. 52)
White spots or shadow
images (noise)
•
Check the position, direction, and
connection of the aerial.
Neither image nor
sound is produced
•
Is the TV in "AV mode"?
•
Is the mains lead plugged into the socket
outlet?
•
Is the TV turned On?
•
Check Picture Menu (p. 22) and volume.
•
Check all required SCART cables and
connections are firmly in place.
Auto aspect
•
Auto aspect is designed to provide you
with the best aspect ratio to use to fill your
screen. For user control please see p. 44.
S-Video / black and
white picture
•
Using AV button please confirm your
selection is S-Video I.e. AV2/AV2S
(p. 16).
No programmes shown
on TV Guide
Prog.Types
All Types
D 1 BBC O D 7 BBC T D 14 E4 D 70 CBBC D 72 Cartoo D 105 BBCi
POP 100
Rugby
Cinema info
News
•
Check the DVB transmitter.
•
Adjust the direction of the aerial to another
transmitter installed nearby.
•
Check the analogue broadcast.
If the image quality is poor, check the
aerial and consult your nearest dealer.
On Screen messages - I.e. EC/AV1
•
Direct TV record / Q-Link
functions not recording
•
There may be red spots, blue
spots, green spots and black
spots on the screen
•
Category
All Services
D 719 BBC R
The LCD panel moves slightly
when it is pushed with a finger
Clattered sound might be heard
•
You can simply clear these by pressing the button .
Press again to redisplay.
Please confirm SCART cable and connection. Also
please set "AV1 / AV2 out" in the Setup Menu (p. 23).
This is a characteristic of liquid crystal panels and is
not a problem. The liquid crystal panel is built with very
high precision technology giving you fine picture details.
Occasionally, a few non-active pixels may appear on the
screen as a fixed point of red, green, blue or black.
Please note this does not affect the performance of your
LCD.
There are some looseness around the panel to prevent
the damage to the panel.
The panel might move slightly when it is pushed with a
finger, and clattered sound might be heard. This is not a
malfunction.
47