Table of Contents
Advertisement
Warning
Do not disassemble or modify the pedestal.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any other TV and displays.
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest Panasonic
dealer immediately.
During assembly, use only screws supplied and make sure that all screws are securely tightened.
If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be
strong enough to support the TV. It might fall over and become damaged and personal injury may result.
Ensure that the TV does not fall over.
If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal
injury may result.
Two or more people are required to install and remove TV.
If two or more people are not present, the TV may be dropped, and personal injury may result.
Assembly screw (4)
XSS4+16FNK
Assembling the pedestal
Use the four assembly screws
to the base securely.
Make sure that the screws are securely tightened.
Securing the TV
Use only the supplied assembly screws
securely.
Make sure that the screws are securely tightened.
Carry out the work on a horizontal and level surface.
Attaching the pedestal
Assembly screw (4)
XYN4+F12FJK
to fasten the bracket
to fasten
Foam mat or thick soft cloth
Bracket (1)
TUX0E197
A
C
Front
D
B
Base (1)
TBL0E0108
(TX-L32C20EA)
TBL0E0129
(TX-L32C20ESA)
B
7
Hide quick links:
Advertisement
Table of Contents
