Panasonic Viera TXL32C20EA Operating Instructions Manual page 31

Menu Item
Shipping Condition
System Update
Software Licence
System Information
AV Colour System
Update
Postcode
System
Information
Auto Standby
Power Save
16:9 Overscan
Time Zone
DVI Input Setting
A different menu will be displayed while SD Card is used.
Only available items can be selected.
Adjustments / Configurations (alternatives)
Resets all settings, for example, when moving house (p. 43)
Downloads new software to TV (p. 44)
Displays the software licence information
Displays the system information of this TV
Selects optional colour system based on video signals in AV mode
(Auto / PAL / SECAM / M.NTSC / NTSC)
Performs the update of the GUIDE Plus+ schedule and advertising informations for
the GUIDE Plus+ system (p. 19)
Sets your postcode to display advertisements in the GUIDE Plus+ system (p. 19)
Displays the system information of the GUIDE Plus+ system
Sets the time the TV automatically goes to Standby mode when no operation is
performed for the selected times (Off / 2 / 4 hours)
Starting Timer Programming automatically does not affect this function.
Automatic input switching with the connected equipment affects this function and
time-count will be reset.
The notification message will appear 3 minutes before going to Standby mode.
Reduces brightness of picture to economise on power consumption (Off / On)
Selects the screen area displaying the image (Off / On)
On : Enlarged the image to hide the edge of the image.
Off : Displayed the image in the original size.
Set to "On" if noise is generated on the edge of the screen.
This function is available when aspect is set to Auto (16:9 signal only) or 16:9.
This function can be memorized separately for SD (Standard definition) and HD
(High definition) signals.
Adjusts the time data
The time data will be corrected based on GMT.
Set to "Auto" to adjust the time automatically according to your area.
Changes the black level in the image for HDMI input mode with DVI input signal
manually (Normal / Full)
When the DVI input signal from the external equipment, especially from PC, is
displayed, the black level may not be suitable. In this case, select "Full".
The black level for HDMI input signal will be adjusted automatically.
(p. 47 and p. 49)
31