Table of Contents
Advertisement
Other Function
Indications that Can Be Displayed on the
TV Screen
At a press of the [OSD/
OSD/DISPLAY
DISPLAY] button, the following
indications appear on the TV
screen.
1
TV station name
2
STEREO, M1 and M2 Indicator
When receiving a TV programme with the Stereo,
Bilingual or NICAM sound system, the type of sound
system in which it is broadcast is automatically
indicated.
STEREO:
When receiving a Stereo/NICAM stereo
broadcast.
M1/M2:
When receiving a Bilingual/NICAM dual-
sound broadcast.
M1:
When receiving a NICAM monaural
broadcast.
3
Sound mode during playback (L/R)
At each press of the [AUDIO] button, the selected
AUDIO
playback sound is indicated with L (Left) and R (Right).
Stereo playback:
The L and R indications are displayed.
Left audio channel playback:
The L indication alone is displayed.
Right audio channel playback:
The R indication alone is displayed.
Playback of normal audio track:
Neither L nor R indication is displayed.
4
Tape speed indicator
5
Tape running display
6
Present time/Tape counter/Remaining tape time/
Index Search/One-Touch Recording (OTR)/
Playback Off Timer Function
Present time
Tape counter
Remaining tape time
Index Search
One-Touch Recording (OTR)
Playback Off Timer Function
Notes:
– If [OSD] is set to [OFF], none of the above indications
appear.
– None of the above indications appear during special
playback.
– During playback and when the AV input for the external
source is selected, indications 1 and 2 do not appear.
– Some of the above indications do not appear when using
NTSC tapes.
28
To Play Back NTSC Video Cassettes on
Your PAL TV or NTSC 4.43 TV
(NTSC Playback Function)
This VCR allows playback of tapes recorded in the NTSC
system on a normal PAL system TV or NTSC 4.43 TV with
1
2
3
4
the same operations as usual. (See page 27.)
On some TVs, however, the playback picture may roll up or
ARD
STEREO
L R SP
down.
– If your TV has a V-HOLD control or equivalent adjustment
function, use it to try to stop the picture movement.
To Record NTSC 4.43 Signals
0:00:29
(NTSC Recording Function)
5
6
You can use this VCR to record NTSC 4.43 signals from an
external source.
For the connection, see page 12.
Crystal View Control (CVC)
The crystal view control function ensures that you always
obtain the optimum picture quality so that you get the best
picture automatically.
While the VCR is turned on, the [CVC] indication is always
displayed to show that the Crystal View Control is activated.
17:24:31
– 2:35.47
REMAIN: 2:34
5 02
OTR 60
30
Advertisement
Table of Contents
