Connecting A Decoder; Connecting A Stereo Amplifier - Panasonic NV-HS825EE Operating Instructions Manual

Connecting a Decoder

Decoder here refers to the device used to decode scrambled
broadcasts (Pay TV).
1
1 Decoder (not supplied)
2 21-pin Scart socket
3 21-pin Scart cable (not supplied)
Connect a 21-pin Scart cable (not supplied) to the AV2
21-pin Scart socket on the VCR and to the 21-pin Scart
socket on the decoder.
Connect the decoder's mains lead to an AC mains
socket.
Set [AV2] to [DECODER].
For details, see page 26.
AV Link Function
If the VCR is connected to the TV via a 21-pin Scart cable,
you can use the [AV LINK] button to switch the TV from
normal TV reception over to the video playback channel (AV
input) (and vice versa). In the VCR mode (when the [VCR]
indication in the VCR display is lit), the TV is switched to the
video playback channel (AV input). In the TV mode (when the
[VCR] indication is not lit), the TV is switched to TV reception.
– When you press the [MENU] button to display the menu on
the TV screen, the TV is also automatically switched to the
VCR mode, however, the [VCR] indication does not appear
in this case.
– When you start playback on the VCR, the TV is
automatically switched to the VCR mode. However, during
playback, it is not possible to switch the TV back to the TV
mode.
– If a Pay TV station has been selected on the VCR when
you switch to the TV mode, the picture on the TV is
scrambled when you select a Pay TV station on the TV. In
this case, either switch to the VCR mode or select the AV
input on the TV.
Hint:
– [RGB] means separate Red/Green/Blue colour signals. If
you connect a TV equipped with RGB input capability to the
AV1 socket on this VCR, and a decoder equipped with
RGB output capability to the AV2 socket, the TV can
receive RGB signal input from the decoder via the VCR.
22
3
2

Connecting a Stereo Amplifier

2
1 Audio cable (not supplied)
2 Stereo amplifier (not supplied)
3 Audio Input sockets
Connect an Audio cable (not supplied) to the Audio
Output sockets on the VCR and to Audio Input sockets
on the stereo amplifier.
Connect the stereo amplifier's mains lead to an AC
mains socket.
1
3