Installation; Building In And Connecting To Services - Miele DG 4064 Installation Instructions Manual

Installation

Building in and connecting to
services
^ Before connecting the appliance to
the mains supply you must
disconnect the electricity supply to
the isolator switch.
See "Electrical Connection".
^ Connect the mains connection cable
to the isolator switch in accordance
with current local and national safety
regulations.
^ Feed the water inlet and drainage
hoses through the cut-out a in the
housing unit. See "Safety
instructions".
^ Push the appliance into the recess as
far as it will go, making sure that the
mains connection cable and the
water inlet and drain hoses do not
get trapped or damaged when doing
so.
After aligning the appliance, it must be
secured against slippage.
^ Secure the appliance using screws
j supplied, as shown in the
diagrams.
^ Switch the electricity supply back on
again. See "Electrical connection".
^ Connect the appliance to the water
supply and drainage outlet.
^ Using the Operating Instructions as a
guide, check all oven functions are
working correctly.
Before using for the first time, check
all hose connections for leaks.
14
DG 4064
DG 4064 L