Mackie ONYX 1220i Owner's Manual page 35

6. Select "Install," and the driver software will be
installed.
7. The following message confirms that the driver
software has been successfully installed.
The audio interface is now ready to use with the
Digital Audio Workstation software of choice, as well as
with consumer audio applications such as iTunes
Windows Media Player.
Installation for Windows XP
1. Connect the FireWire cable from your Onyx
1220i to the computer.
2. Power on your Onyx 1220i .
3. The Windows XP application will start its
"Found New Hardware" wizard.
4. Ignore any attempt to connect to Windows Up-
date to find the software, by checking the "No,
not at this time" button. Select "Next."
or
®
5. Insert the CD that came with your Onyx 1220i
(if you haven't already).
6. Select "Install the software automatically."
Owner's Manual 35