Table of Contents
Advertisement
TV
AV3
V
AV3 terminals
L
(p. 93)
R
Headphones
jack (p. 93)
SD Card slot
(p. 66)
CI Slot
(p. 57)
HDMI4 terminal
(p. 93)
HDMI 4
2
USB 2 port
(p. 13, 62, 66
and p. 75)
Auto power standby function
The TV will automatically go to Standby mode in the following conditions:
•
no signal is received and no operation is performed for 30 minutes in Analogue TV mode
•
"Off Timer" is active in the Setup Menu (p. 19)
•
no operation is performed for the period selected in "Auto Standby" (p. 36)
This function does not affect the recording of Timer Programming, Direct TV Recording and
One Touch Recording.
Using the On Screen Displays
Many features available on this TV can be accessed via the On Screen Display menu.
How to use remote control
MENU
Open the main menu
Move the cursor / select the menu item
Access the menu / store settings after
adjustments have been made or options
have been set
ON SCREEN HELP Instructions box - Operation guide
Example (Owner ID):
Owner ID
Please enter new PIN
PIN
*
* * *
EXIT
PIN entry
0
9
RETURN
Function select
For changing TV channel up or down. When a function
is selected by the 'F' button, press to increase or
decrease the setting of the selected function. When in
Standby mode, press either button for about 1 second to
switch the TV On.
Changes the input mode
Mains power On / Off switch
•
Power and Timer LED
Red : Standby
Green: On
Orange: Timer Programming On
Orange (flash): Recording of Timer Programming, Direct TV Recording or
One Touch Recording is in progress
Red with
orange flash: Standby with Timer Programming On, Direct TV Recording or
One Touch Recording
The LED blinks when the TV receives a command from the remote control.
C.A.T.S. (Contrast Automatic Tracking System) sensor
•
Senses brightness to adjust picture quality when "C.A.T.S." in the Picture Menu is set
to "On" (p. 32).
Remote control signal receiver
Do not place any objects between the TV remote control signal receiver
and remote control.
Operation guide will help you.
Volume / Contrast / Brightness / Colour / Sharpness /
Tint (NTSC signal) / Bass ("Music" or "Speech" mode in the
Sound Menu) / Treble ("Music" or "Speech" mode in the
Sound Menu) / Balance / Auto Setup (p. 40 and p. 41)
Use to switch mains power On / Off.
If TV was switched off whilst in Standby mode, using the
Mains Power On / Off switch, then it will be in Standby mode
when switched back on using the same switch.
EXIT
Exit the menu system and return to the
normal viewing screen
Move the cursor / adjust levels / select from
a range of options
BACK/
RETURN
Return to the previous menu
9
Hide quick links:
Advertisement
Table of Contents
