Securing The Tv - Panasonic Viera TX-L32G20BA Operating Instructions Manual

To help avoid risk of damage or injury by the TV tipping or falling, please follow the warnings and
cautions below:
Warning
Do not disassemble or modify the pedestal.
Caution
Do not use with any other TVs or displays.
Do not use the pedestal if it becomes warped or physically damaged. If this occurs, contact your nearest
Panasonic dealer immediately.
During setup, make sure that all screws are securely tightened.
Ensure that the TV does not suffer any impact during installation of the pedestal.
Ensure that children do not climb onto the pedestal.
Install or remove the TV from the pedestal with at least two people.
Assembly screw (4)
XSS4+16FNK
Assembling the pedestal
Use the four assembly screws
to the base securely.
Forcing the assembly screws the wrong way will strip
the threads.
Make sure that the screws are securely tightened.

Securing the TV

Use only the supplied assembly screws
the pedestal securely to the TV.
Make sure that the screws are securely tightened.
Carry out the work on a horizontal and level surface.
Ensure that the pedestal does not hang over the edge of the base even if the TV swivels to the full rotation range.
Do not place any objects or hands within the full rotation range.
TX-L32G20BA
a: 358 mm / b: 230 mm
TX-L37G20BA
a: 399 mm / b: 296 mm
Note
Visible part of the pedestal will remain parallel to the TV even when rotated.
Attaching the pedestal
Assembly screw (4)
XYN4+F12FJK
to fasten the bracket
to fasten
Foam mat or thick soft cloth
Adjust the panel to your desired angle
Set the mark at the centre as illustrated, to
ensure full degree rotation in either direction.
Bracket (1)
TUX0EA004
(TX-L32G20BA)
TUX0E198
(TX-L37G20BA)
C
Front
b
15°
a
(View from the top)
Base (1)
TBL0E0110
(TX-L32G20BA)
TBL0E0111
(TX-L37G20BA)
A
D
B
B
15°
7