Battery Charge; Battery Installation - Panasonic KX-TG1100FX Operating Instructions Manual

TG1100_1102FX(e-e).book Page 6 Wednesday, February 15, 2006 11:42 AM
Preparation
Location
For maximum distance and noise-free
operation, place your base unit:
− Away from electrical appliances such as
TVs, radios, personal computers or other
phones.
− In a convenient, high and central location.

Battery installation

Insert the batteries negative (T) terminal
first. Close the handset cover.
Note:
L Use only the included rechargeable
batteries (page 3, 4).
Turning the power on/off
Power on
Press {ih} for about 1 second.
Power off
Press {ih} for about 2 seconds.
6

Battery charge

Place the handset on the base unit or
charger for about 7 hours before initial
use.
Battery strength
Battery icon Battery strength
Fully charged.
054
High
5
Medium
6
Low
7
Needs to be charged.
074
Panasonic Ni-MH battery performance
Operation
In continuous use
In continuous standby
mode
Note:
L It is normal for batteries not to reach full
capacity at the initial charge. Maximum
battery performance is reached after a few
complete cycles of charge/discharge
(use).
L Actual battery performance depends on a
combination of how often the handset is in
use and how often it is not in use
(standby).
L Even after the handset is fully charged,
the handset can be left on the base unit or
charger without any ill effect on the
batteries.
L The battery strength may not be displayed
correctly after you replace the batteries. In
this case, place the handset on the base
unit or charger and charge for at least 7
hours.
Operating time
10 hours max.
120 hours max.