Watching Vcr, Dvd And Satellites - Panasonic Viera TH-65PX600B Operating Instructions Manual

Watching VCR, DVD and Satellites

Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch the input.
Connect the Satellite receiver and you can watch satellite broadcasts.
To connect the equipment (p. 8 and p. 9)
The Remote Control is capable of operating some functions of selected Panasonic external equipment.
Turn the TV on
1
■
When connecting with SCART as example 2 or 3 (p. 8 and p. 9)
•
Input signals are automatically identified by the SCART (pin 8) terminal.
•
This function will be available for HDMI connection too (p. 41).
■
If input mode is not switched automatically
•
Dependant on DVD/VCR setup
Select the external input
2
Screen display
Manual input
selection
Auto input
selection
3 Select the connector
connected to the equipment
red
AV1
•
example: AV1
•
When colour bar disappears
Note
•
You can also select the connector using the TV/AV button on the front panel
of the TV.
■
Press the button repeatedly until you reach the connector to view.
•
To return to TV
If the external equipment has an aspect adjustment function, set to "16:9".
•
For details, see the manual of the equipment or ask your local dealer.
•
HDMI (p. 41)
16
Receives input signals automatically when playback starts or
satellite receiver is switched on
Perform and
(AV mode screen)
Terminal
Component PC
AV1 AV2 AV3 AV4
AV2 AV3 AV4
AV1 AV2S AV3S AV4S Component
(S-video input) (S-video input) (S-video input)
EC1/RGB EC3/RGB
AV1/RGB EC2 AV3/RGB ― ―
(RGB input) (RGB input)
Displays the selected connector
blue
red
green yellow green yellow
AV2/ AV3/ AV4/ Component/
S-video S-video S-video PC
PC (twice)
red blue yellow
Press any coloured buttons
Panasonic equipment connected to the TV can be directly operated with the remote control.
HDMI1 HDMI2 HDMI3
PC HDMI1 HDMI2 HDMI3
EC/
― HDMI1 HDMI2 HDMI3
HDMI1/2/3
blue
HDMI1/
HDMI2/
HDMI3
∗
Setting your remote control to operate Panasonic VCR, DVD, etc.
Set the VCR / DVD switch to the appropriate position
Press and hold
Enter the appropriate code for the equipment
to be controlled, see table below
"VCR" position
Equipment
VCR
DVD
Note
•
Confirm correct operation after code changed.
•
The codes will be reset to default values if batteries are replaced.
•
"DVD" means DVD player, DVD recorders and Recorder home theatre.
•
Some operations may not be possible on some equipment models.
∗
VCR / DVD switch
Select VCR to operate Panasonic VCR or DVD equipment
Select DVD to operate Panasonic DVD equipment or Player home theatre
Standby
Set to Standby mode / Turn on
Play
Playback videocassette / DVD
Stop
Stop the operations
Rewind / Skip / Search
VCR: Rewind, view the picture rapidly in reverse
DVD: Skip to the previous track or title
Press and hold to search backward
Fast-forward / Skip / Search
VCR: Fast-forward, view the picture rapidly forward
DVD: Skip to the next track or title
Press and hold to search forward
Pause
Pause / Restart
DVD: Press and hold to play at slow speed
Programme Up / Down
Select programme
Record
Start recording
during the following operations
Press
"DVD" position
Code Equipment Code
10 (default) DVD 70 (default)
11 Player home theatre 71
17