Start The Programme; At The End Of The Programme - Royal WH 1092 Installation And Instruction Manual

7. Start the programme

To start the selected programme, press the
START/PAUSE button; the corresponding light stops
flashing.
The pilot light corresponding to the wash phase
which is running is on.
The door light comes on to indicate that the door is
locked.
The machine starts operating.

8. At the end of the programme

The machine stops automatically.
If the RINSE HOLD option has been selected, the
light of the START/PAUSE button flashes and the
phase light RINSE HOLD remains lit to indicate that
the water must be emptied out before opening the
door.
The door can only be opened after the door locked
light has gone out.
Release of the lock is also indicated by the coming
on of the END light.
Turn the programme selector dial to OFF.
Remove the laundry from the drum and carefully
check that the drum is empty so as to avoid any
forgotten items being damaged in a subsequent
wash (e.g. shrinking) or their colour running into a
load of whites.
If you do not intend to carry out another wash, close
the water tap.
Leave the door open to prevent the formation of
mildew and unpleasant smells.
17