Use; Control Panel; Controls - Royal WH 1092 Installation And Instruction Manual

Use

Control panel

1 Detergent dispenser drawer
Programme Option buttons
Depending on the programme, different functions
can be combined. These must be selected after
choosing the desired programme and before
depressing the START/PAUSE button.
When these buttons are pressed, the corresponding
pilot lights come on. When they are pressed again,
the pilot lights go out.
If an incorrect option is selected, the corresponding
pilot light flashes for about 2 seconds.
2 Spin speed button
Press this button to reduce the maximum speed of the
final spin proposed by the machine for the selected
programme or to select position
The light corresponding to the selected option
illuminates.
Spin speed
The following speeds are available for the different
fabrics:
• Cotton, linen:
500/700/900 max 1000 r.p.m.
• Synthetics, wool:
500/700 max 900 r.p.m.
• Delicates:
500 max 700 r.p.m.
No Spin
By selecting this option the spinning phases are
suppressed.
This function is not available for cotton and linen.
To be selected for extremely delicate items.
(no spin).
10
3 Prewash button
The machine performs a prewash cycle at 30°C max.
The prewash cycle ends with a short spin at 650
r.p.m. in programmes for Cotton and Synthetics, and
with emptying of the water for Delicates.
This option is not available with the wool
programme.
For use when washing heavily soiled laundry.
4 Quick wash button
By pressing this button the washing time is reduced
as follows:
• 52 minutes for cotton 95°C
• 63 minutes for cotton 60°C and 50°C
• 72 minutes for cotton 40°C and 30°C
• 24 minutes for synthetics
• 8 minutes for delicates
This option is not available with the wool programme
and the Energy saving programme.
To be used for lightly soiled laundry.
5 Rinse Hold (anti-crease) button
By selecting this option the last rinse water is not
emptied out, to prevent the fabrics from creasing.
When the programme has finished, the pilot light of
the START/PAUSE button flashes and the phase
light RINSE HOLD remains lit to indicate that the
water must be emptied out.
To empty out water there are 3 possibilities:
• Select programme "PUMP OUT" (draining):
The water is emptied out without spinning.
Attention! Before selecting programme "PUMP
OUT" the selector dial has to be positioned on OFF
(cancelling).