Panasonic Viera TX-L19E3B Operating Instructions Manual page 63

Reduce unnecessary power consumption in standby [Standby Power Save]
Set Standby Power Save [On] in the Setup Menu to use this function
The power consumption in Standby mode of the connected equipment is controlled in synchronization with the TV On / Off
state.
When the TV is set to Standby mode, the connected equipment is automatically set to Standby and the power consumption in
Standby mode of the connected equipment is automatically minimised.
When the TV is turned on and the connected equipment is still in Standby mode, the power consumption of the connected
equipment is increased to reduce the startup time.
This function is effective if the connected equipment can change the power consumption in Standby mode and is set to
higher consumption.
Auto standby for unnecessary equipment [Intelligent Auto Standby]
Set Intelligent Auto Standby [On (With reminder)] or [On (No reminder)] in the Setup Menu to use this function
[Intelligent Auto Standby] (p. 30)
When the TV is On, non-watched or non-used connected equipment goes into Standby mode automatically to reduce power
consumption. For example, when the input mode is switched from HDMI, the connected equipment will go into Standby mode
/ when Speaker Selection is changed to [TV], the Player theatre will go into Standby mode (except when watching a disc).
If you select [On (With reminder)], the on screen message will be displayed before the connected equipment turns to
Standby.
This function may not work properly depending on the connected equipment. If required, set to [Off ].
Direct TV Recording
Recording the current programme on a DIGA Recorder immediately.
If you connect a variety of recorders including other manufacturers' recorders at the same time, please connect the DIGA
Recorder to the TV's lower HDMI terminal number. For example, if you use HDMI1 and HDMI2 for two recorders, connect the
DIGA Recorder to HDMI1.
If Direct TV Recording does not operate, check the settings and the equipment
features" (p. 59, 60), "Preparations" (p. 62)
If you wish to record a programme that the DIGA Recorder does not support, a SCART connection is required and the
programme is recorded by Q-Link function (p. 61).
Depending on the programme, a SCART connection may be required to record.
Changing channel or turning off the TV is available while the recorder is recording from its own tuner.
Changing channel is not available while the recorder is recording from the TV tuner.
INPUT
SD CARD
TV AV
MENU ASPECT N DIRECT TV REC
EXIT
OPTION RETURN
To stop recording
Select [Stop] in [Direct TV Rec]
VIERA Link Menu
Pause Live TV Start
Direct TV Rec Stop
VIERA Link Control Recorder
Speaker Selection Home Cinema
You can also stop recording directly.
Unlock the tuner
Any timer programme in progress will also be deleted.
- What you see is What you record
Display [VIERA Link Menu]
1
Select [Direct TV Rec] and start recording
2
VIERA Link Menu
Pause Live TV Start
Direct TV Rec Stop
VIERA Link Control Recorder
Speaker Selection Home Cinema
select
stop
Tuner Locked
Press EXIT to unlock.
[Standby Power Save] (p. 30)
[Direct TV Rec]
"Summary of Q-Link and VIERA Link
You can also start recording directly.
DIRECT TV REC
EXIT
select
start
63