Table of Contents
Advertisement
2. Choose Your Connection Type
Connection and setting up options
• If connecting this set using an RF cable only, see below.
• If connecting this set using Scart and RF cables, see page 10.
• If connecting this set to a Q-Link (or Q-Link compatible) VCR, see page 10.
• If connecting this set to a Q-Link (or Q-Link compatible) VCR and a satellite receiver, see page 11.
What is Q-Link?
Q-Link allows direct communication between the set and a Q-Link (or Q-Link compatible) VCR, this will enable
features such as downloading of tuning information from the set to the VCR.
When using a "NEXTVIEWLINK" VCR the main features possible are the following:
• Preset Download
• Direct TV Record
When using a "Q-Link" VCR the main features possible are the following:
• Preset Download
• Direct TV Record
• TV/VCR Auto Power On
• VCR Auto Power Stand-by
• VCR Image view On
This set will also communicate with other VCRs that bear the following logos:
• "DATA LOGIC"
• "Easy Link"
• "Megalogic"
• "SMARTLINK"
These VCRs may support some or all of the above funcitons. Refer to the VCR operating instruction book.
Further information on Q-Link can be found on page 36.
In order for Q-Link to function correctly, the Scart cables must be connected in a certain way, dependent on
whether the set is being connected to a VCR or to a VCR and Satellite Receiver.
1. Connecting this set directly to an ANTENNA only
AV1
RGB
VIDEO
ANTENNA
(Not Supplied)
Antenna Lead
Downloading of tuning information from the set to the VCR.
For immediate recording of the current program (What You See Is What You Record).
Downloading of tuning information from the set to the VCR.
For immediate recording of the current program (What You See Is What You
Record).
When the VCR plays a tape the set will automatically switch On (From Stand-
by) and select the AV2 input.
When the set is switched into Stand-by, the VCR will also switch into Stand-by.
If the set is in Stand-by mode and the VCR sends a menu to be displayed on
the TV screen (e.g. Main menu), the set will automatically switch On and the
menu will be displayed.
(a trademark of Metz Corporation).
(a trademark of Philips Corporation).
(a trademark of Grundig Corporation).
(a trademark of Sony Corporation).
P
P
Y
L
AV2
AV4
R
B
R
VIDEO
R
L
VIDEO
RGB
VIDEO
AV4C
AUDIO
S-VIDEO
S-VIDEO
AUDIO OUT
AV1
RGB
VIDEO
Quick start Guide
RF connection
Connect the Antenna lead into this set
DISPLAY OUT
Antenna Input terminal (
AV2
VIDEO
S-VIDEO
).
9
Advertisement
Table of Contents
