Identifying Controls - Panasonic Viera TX-L19X10E Operating Instructions Manual

Accessories / Options
Rear of the TV
●
Do not bundle the RF cable and mains lead together (could cause distorted image).
●
Fix cables with clampers as necessary.
●
When using the optional accessory, follow the option's assembly manual to fix cables.

Identifying Controls

TV
CI slot
(p. 38)
Headphones
jack
(p. 55)
SD Card slot
(p. 44)
8
SD
CARD
C.A.T.S. (Contrast Automatic Tracking System) sensor
●
Senses brightness to adjust picture quality when "Eco Mode" in the Picture Menu
is set to "On" (p. 26)
Remote control signal receiver
●
Do not place any objects between the TV remote control signal receiver and
remote control.
Using the clamper
To tighten:
To loosen:
Keep the
knob pressed
Mains power On / Off switch
●
Switch On to turn on the TV or turn the TV to standby
mode by the remote control
Recording LED
●
Standby for Direct TV Recording: orange
Power LED
●
Standby: red
On: green
●
When using the remote control, indicates the TV has received a command.
Changes the input mode
Increases or decreases the channel
position by one. When a function is
already displayed, press to increase or
decrease the selected function.
When in Standby mode, switches TV On.
Function select
●
Volume / Contrast / Brightness / Colour /
Sharpness / Tint (NTSC mode) / Bass / Treble /
Balance / Auto Setup (p. 30 and p. 31)