Other Play Methods; Program Play; Repeat Function; Random Play - Panasonic SL-S355 Operating Instructions Manual

Other Play Methods

The letters such as A in the various illustrations refer to the descriptions in the "Location of Controls" section (see page 2).
Skip play
The disc plays from the specific track through to the
end, then play stops automatically.
Preparation:
Put unit in stop mode.
1
L
2
Select the desired track.
A
3
D

Random play

1
L
2
D
Release
L
For your reference:
≥It is also possible to press [9] while the unit is in
stop status to change the first track to be played. (All
tracks are played eventually, regardless of which is
played first.)
≥Program play is not possible in the random mode.

Resume play

This function allows you to listen from the beginning of
the track where play stopped because the unit was
powered off (or switched to stop status). It is useful
when listening to CDs in the car, etc.
L
Release
L
For your reference:
≥If the [RESUME, NORMAL, RANDOM (play mode)]
slider is put in the [RESUME] position, the all-
repeat function will be activated automatically as soon
as the unit is powered on.
≥If power is cut off near the end of a track (power off
status), playback may resume from the beginning of
the next track.
≥If the unit is powered off while a disc was playing and
then a new disc is inserted, play will begin from the
middle of the new disc because the unit remembers
the position where play stopped on the previous disc.
4

Program play

Up to 24 tracks can be entered in the programmed se-
quence.
Preparation:
Put unit in stop mode.
1
L
2
Select the desired track.
A
3
Register in sequence.
(The indication "M" and the programmed se-
quence appear on the display panel.)
F
4
Repeat steps 2 and 3 to program all
the desired tracks.
5
D
∫ To program the same track in the se-
quence more than once
After step 3, press [MEMORY/RECALL] the desired
∫
number of times.
∫ If "'" is displayed
∫ No more tracks can be programmed.
∫ To confirm the contents of the program
∫ Press [MEMORY/RECALL] while the disc is playing.
(The number of the programmed tracks appear on
the display panel in sequence.)
∫ To delete the entire programmed se-
quence
Press [∫, POWER OFF].
∫

Repeat function

Press during play or stop mode.
E
The setting is switched in the sequence indicated below
each time [REP] is pressed.
1-track repeat (1 `)( ----------------]
One track is repeated.
;
All-track repeat (ALL `)
All the tracks on the disc are repeated. |
;
Cancel ------------------------------------------------}
For your reference:
If [REP] is pressed during program play, only the tracks
in the program are repeated.
(The indication "ALL" is not displayed.)

Changing the sound quality

Press during play or stop mode.
S-XBS
J
The setting switches in the sequence indicated below
each time [S-XBS] pressed.
S-XBS>Normal (No indicator is shown.)
^========b
S-XBS:
Select this setting to boost the low-range response.
B
|
|
|
|
S-XBS