Measurement - Lumiscope 1092 Instruction Manual

Measurement

NOTE: Unit measures on inflation.
• To start the measurement
Press the "Power/Start" switch.
• The heart symbol will flash and the buzzer will
sound for 1 second. When the unit completes the
preparations for measurement, the buzzer will
sound three more times.
If batteries are weak, " " mark will not appear.
• Pressurization and measuring begin.
• When a pulse is detected, the pressure value
moves to the lower side of the display. At this time
the " " mark flashes and buzzer beeps.
• Once the blood-pressure measurement has stabi-
lized, pressurization is discontinued and the air in
the cuff is automatically let out.
• The buzzer sounds for about 2 seconds, and the
high and low blood pressure are respectively dis-
5