Identifying Controls - Panasonic Viera TH-42PZ70B Operating Instructions Manual

Installation of the pedestal
■
Attaching the bands for fixing cables
E
Preventing the TV from falling over
The TV could fall over during an earthquake, etc.
• We recommend that measures are taken to prevent the TV from falling over in such an event.
The information in this section is designed to reduce the risk of injuries caused by the TV falling over during an
earthquake, etc.
• However, no measure can guarantee protection against all earthquakes.
The precautions in this section are recommendations for providing more secure installation of your TV if you live
in an earthquake prone area.
Band (2) Screw (2)
Nominal diameter 4 mm × 12
■
Securing to a base
Fix pedestal and base together with band.
■
Securing to a wall
Fix to wall or post with strong commercial wire or chain.
•
Before fixing, make sure that it does not obstruct the side panel door and the use of the buttons / terminals inside.
Side
panel
door
Select two screws which have held the rear cover
of the TV (one screw each from right and left side
at the same height position).
Remove the two screws you selected, and attach
the clamps
8
screws.
Insert the spigot on the two To tighten:
bands into the pedestal.
To loosen:
Keep the
knob pressed
Wood screw (2) Clamp (2)
Remove
Attach
4
to the TV using the removed

Identifying Controls

F
AV3
S-V
V
L
R
Mains power
On / Off switch
Remote control
signal receiver
C.A.T.S.
(Contrast Automatic Tracking System) sensor
( senses brightness to adjust picture quality
in "Auto" Mode in Picture Menu) (p. 24)
Power LED DVB LED
• •
Standby: red Active for Timer Programming or
On: green Standby for Direct TV Recording :orange (flash)
When using the remote Timer Programming On :orange
control, indicates the TV
has received a command.
Standby On / Off switch
(Switches TV On or Off standby)
Changes aspect ratio (p. 15)
Access VIERA Link Menu
(p. 45)
TV Guide (p. 16)
OK button to confirm selections and choices
Press after selecting programme positions to
quickly change programme.
Main Menu
Press to access VIERA Link, Picture,
Sound and Setup menus
(p. 23)
Teletext (p. 20)
Subtitles
Showing subtitles (p. 15)
Programme / channel change buttons (0-9)
and Teletext page buttons.
(p. 14 and p. 21)
When in Standby mode, switches TV On.
Programme Information
(p. 15)
Selects programmes in sequence
VCR / DVD operations (p. 19)
MULTI WINDOW
Surround
(p. 24)
Function select
•
Volume / Contrast / Brightness / Colour /
Sharpness / Tint (NTSC mode) / Bass /
Treble / Balance / Auto Setup (p. 32)
Increases or decreases the
programme position by one. When a
Swing door
function is already displayed, press
to open
to increase or decrease the selected
function. When in Standby mode,
switches TV On.
Changes the input mode
Headphones jack (p. 46)
AV3 terminals
(p. 46)
SD CARD slot (p. 41)
Changes the input mode
TV - switches DVB (digital broadcasting)
/ Analogue mode (p. 14)
INPUT
AV - changes AV input mode
OPTION SD CARD Viewing SD Card (p. 40)
Option menu
EXIT
Sets the selectable settings of viewing
and sound options easily
(p. 15)
EXIT
(Returns to TV screen)
Cursor buttons to make selections and
RETURN
adjustments
Returns to the previous menu
Coloured buttons used for the
selection, navigation and operation of
various functions
Still picture (p. 15)
Teletext Hold
(p. 22)
Teletext Index
(p. 22)
Sound mute On / Off
Volume
DIRECT TV REC
DIRECT TV Recording
To immediately record programme in VCR /
DVD recorder with Q-Link connection
(p. 42)
(p. 18)
9