Adjusting Position And Size - Panasonic TH-37PA20 Operating Instructions Manual

PC mode Adjustments

Adjusting Position and Size

Adjusting screen
SET UP
1
2
3
TV/AV
When the Position Left "-" button is pressed
H-Size
When the Position Left "-" button is pressed.
V-Size
When the Position Left "-" button is pressed.
H-Pos
When the Position Left "-" button is pressed.
V-Pos
Flickering and distortion can be eliminated by using the Position Left " - " or Right " + " button
Clock Phase
to carry out adjustment.
H & V : To synchronize by the horizontal and vertical signals from your PC.
Sync
on G : To synchronize by the green signal form your PC (if available).
Helpful Hint (
While the "Setup" menu is displayed, if either the N button on the remote control is pressed at any time or the
button is pressed while the yellow cursor is at the "Normalise" position, then all adjustment values are returned to the
factory settings.
34
Press to display the Setup menu.
Press to select H-Pos/H-Size/V-
Pos/V-Size/Clock Phase.
Setup
Normalise
Normal
H-Size
V-Size
H-Pos
V-Pos
Clock Phase
Sync
H & V
Press to adjust Pos/Size.
Press to exit from adjust mode.
/
Normalise
1 2 3
4 5 6
7 8 9
0
When the Position Right "+" button is pressed.
When the Position Right "+" button is pressed.
When the Position Right "+" button is pressed
When the Position Right "+" button is pressed.
Normalisation)
1
Press TV/AV button.
2
Press Yellow (AV3) button to
access 'PC' mode.
OR
1
Press PC button to access
'PC' mode.
Note:
Press PC button again to return to
watching the current programme.
or