Pc Mode Adjustments - Panasonic TH-37PA20 Operating Instructions Manual

PC mode Adjustments

When you switch to PC input (AV3 / PC), Picture menu will be changed as shown bellow.
Sound menu will not be accessible in PC mode.
PICTURE
1
2
Picture
Normalise
Normal
Picture Mode
Contrast 25
Brightness 0
Sharpness 0
White balance
Advanced settings
Press to select "On".
Press to enter
Advanced settings .
Advanced settings On
Enables fine picture adjustment at a
professional level (see next page).
Advanced settings
Normalise
Normal
W/B High R
W/B High B
W/B Low R
W/B Low B
Gamma
Advanced settings Off
Displays images with settings of the
Picture menu.
Helpful Hint (
While the "Picture" menu is displayed, if either the N button on the remote control is pressed at any time or the
button is pressed while the yellow cursor is at the "Normalise" position, then all adjustment values are returned to the
factory settings.
32
Press to display the Picture menu
screen.
Press to select the menu to adjust.
Adjust the desired level by looking
at the picture behind the menu.
Normal
Normal
On
0 0
0
0
0
2. 2
/
Normalise
1 2 3
4 5 6
7 8 9
0
Press the left "-" or right "+" button to switch between
modes.
Auto
Cinema
Auto
Automatically selects the mode that best suits the
brightness of the environment.
Normal
For viewing in standard (evening lighting)
environments.
This menu selects the normal levels of
Brightness and Contrast.
Dynamic
For viewing in brighter environments.
This menu selects higher than normal levels of
Brightness and Contrast.
Cinema
Ideal for movies.
Note:
If you would like to change the picture and colour of
the selected Picture Mode to something else, adjust
using the items in the Picture Mode. (see next page)
Press the left "-" or right "+" button to switch between
modes.
Normal
Normalisation)
1
Press TV/AV button.
2
Press Yellow (AV3) button to
access 'PC' mode.
OR
1
Press PC button to access
'PC' mode.
Note:
Press PC button again to return to
watching the current programme.
Normal
Dynamic
Cool Warm
or