Using The Remote Control - Panasonic NV-GS230EB Operating Instructions Manual

Digital video camera

Hide thumbs Also See for NV-GS230EB:

Service manual (61 pages)

Table Of Contents

Table of Contents

In order to increase the brightness of

the entire LCD monitor

Press the [POWER LCD] button.

≥The [POWER LCD] lamp lights up.

≥If the [POWER LCD] button is pressed, the

entire LCD monitor will become approx. twice

as bright as the normal.

≥Press this button again, and the lamp will go off

and the brightness will revert back to the original

brightness.

≥This will not affect the images to be recorded.

≥If you turn on the camera when the AC adaptor

is used, the [POWER LCD] function will

automatically be activated.

Changing the picture quality on the

LCD monitor

Set [SETUP] >> [LCD AI] >> [DYNAMIC] or

[NORMAL].

[DYNAMIC]: The image on the LCD monitor

becomes clear and vivid. Optimum

contrast and brightness are set

depending on the scenes recorded.

Clear and brilliant images are

presented. (The effect will vary

depending on the images

recorded.)

[NORMAL]:

Switches to the standard picture

quality.

≥The effect will vary depending on the scene

recorded.

≥The picture quality on the viewfinder will not be

affected.

≥This function is automatically set to [DYNAMIC]

when the brightness of the LCD monitor is

increased (when the [POWER LCD] lamp lights

up) and cannot be set to [NORMAL]

independently.

≥This will not affect the images to be recorded.

≥When the LCD monitor is rotated by 180°

towards the lens, the picture quality of the LCD

monitor is temporarily adjusted as if the

[LCD AI] is set to [NORMAL].

Before using