Cd Play Modes; Program Play; A-B Repeat - Panasonic RX-VT80 Operating Instructions Manual

CDs
1
4
3

CD Play Modes

VCD 1.1 CD MP3
Remote control only
1
Press [PLAY MODE] to select the desired mode.
Every time you press the button:
1
1
RANDOM
RANDOM
off (no indication) : Plays all tracks on the disc.
For MP3: RANDOM and RANDOM REPEAT modes are not
possible.
(The original display or screen returns after about 2 seconds.)
VCD 1.1 CD
Proceed to step 2 if you selected 1-REPEAT in step 1.
MP3
Proceed to steps 3 and 4 if you selected 1-REPEAT in step1.
2
VCD 1.1 CD
When you selected 1-REPEAT in step 1
Select the track with the numbered buttons.
To select a track 10 or over, press [
Play starts from the selected track.
3
MP3
When you selected 1-REPEAT in step 1
Press [ ALBUM] or [ALBUM
and press [ENTER].
4
MP3
Press [ PREV] or [
5
Press [ SELECT].
The CD starts.
To stop play
Press [ PBC/CLEAR].
To cancel
• Press [PLAY MODE] to clear the PLAY MODE indicator on the
display.
• Set [SELECTOR] to RADIO or TAPE/
• Open the CD lid.
Note
You cannot select RANDOM or RANDOM REPEAT
VCD 1.1 CD
play during PROGRAM mode.
8
RQT7801
OSD OSD
MUL MULTI SCREEN TI SCREEN DISPLA DISPLAY TIME TIME ACCESS ACCESS
ZOOM ZOOM
PLA PLAY MODE MODE
2
A-B REP A-B REP
PROGRAM PROGRAM
5
SELECT SELECT
PREV PREV NEXT NEXT
PBC / PBC / CLEAR CLEAR
ENTER ENTER
ALBUM ALBUM
SHIFT SHIFT RESUME RESUME V-INDEX -INDEX
RANDOM RANDOM
off (no indication)
: Plays and repeats one song only.
(1-REPEAT)
: Repeatedly plays all tracks on the disc.
(ALL-REPEAT)
: Plays all the tracks on the disc in random
order.
: Repeatedly plays all the tracks on the disc in
random order. (RANDOM REPEAT)
10] then the two numbers.
] to select an album
NEXT] to select a track.
.
OPR OFF
PBC / CLEAR PBC / CLEAR

Program play

VCD 1.1
You can program up to 24 tracks.
Remote control only
1
Press [PROGRAM].
"PGM" appears.
Proceed to steps 3, 4 and 5.
MP3
2
Select the tracks with the numbered buttons.
To select track 10 or over, press [
Repeat step 2 to program other tracks.
3
An album list appears.
MP3
Press [
and press [ENTER].
4
A track list appears.
MP3
Press [
press [ENTER].
Repeat this step to program other tracks.
To program from another album
Press [
5
Press [
To exit program mode
Press [PROGRAM] in the stop mode. (You can replay your
programmed tracks by pressing [PROGRAM] and [
To cancel
• Press [
"CLEAR" will now be displayed.
• Open the CD lid to cancel this mode.
To check program contents
Press [
displayed.
Every time you press the button, the track number and program order
are displayed.
To add to the program
Repeat steps 2 - 4 while checking program contents.
Note
• You cannot program CD-DA tracks together with MP3 tracks.
MP3
• "Cd FULL" appears when over 24 tracks are programmed.

A-B repeat

VCD 2.0 VCD 1.1
Remote control only
While a disc is playing, if you specify a start point (point A) and an
end point (point B), that segment will be repeated.
1
(During playback)
Press [A-B REP] at the start point (point A).
2
Press [A-B REP] at the end point (point B).
The segment between A and B is played repeatedly.
To cancel A-B repeat
Press [A-B REP] during the A-B repeat playback.
For your reference
• A-B repeat can only be done with the same track.
• A-B repeat is not possible with video CD when the time difference
between A and B is less than 2 seconds.
• A-B repeat is not possible during PROGRAM mode.
• During A-B repeat, TIME ACCESS cannot be used.
OSD OSD
MUL MULTI SCREEN TI SCREEN DISPLA DISPLAY TIME TIME ACCESS ACCESS
ZOOM ZOOM
1,2
PLA PLAY MODE MODE
A-B REP A-B REP
1
PROGRAM PROGRAM
SELECT SELECT
4
PREV PREV NEXT NEXT
PBC / CLEAR PBC /
ENTER ENTER
PBC / PBC / CLEAR CLEAR
ALBUM ALBUM
SHIFT SHIFT RESUME RESUME
3 V-INDEX -INDEX
CD MP3
10] then the two numbers.
ALBUM] or [ALBUM
PREV] or [ NEXT] to select a track and
], and then repeat the steps 3 and 4.
SELECT] to start play.
PBC/CLEAR] in the stop mode while "PGM" is displayed.
PREV] or [ NEXT] in the stop mode while "PGM" is
CD
2
5
] to select an album
SELECT].)